FPM O-Ring 2.57 x 1.78 mm (FPM 75)
From
$1.30*
Properties of Viton (FPM/FKM): Fluoroelastomers have become increasingly important in the sealing industry. Due to their wide scope of application regarding chemical resistance, temperature range, low compression set and excellent aging properties, FPM/FKM is the most significant standalone elastomer developed in recent times. Fluoroelastomers are highly fluorinated carbon-based polymers that resist harsh chemical attacks and ozone in various applications. The operating temperature is between -20°C/-4°F and +204°C/+400°F, and temporarily higher.Fluoroelastomer o-rings should be considered for use in aircraft, automobiles and other mechanical equipment where maximum resistance to high temperatures and many fluids is required. FKM (FPM, Viton®) resists mineral oils and lubricants, aliphatic, aromatic and also special chlorinated hydrocarbons, gasoline, diesel fuels, silicone oils and lubricants. It can be used in high vacuum applications.- Excellent temperature resistance- High chemical stability- Very good ozone, weather, aging and oxygen resistance- Excellent resistance to mineral oils and fats- Low gas permeability- Very good resistance to non-polar media- Temperature resistance from -20°C/-4°F to +204°C/+400°FO-ring sizes: Inner diameter x cross sectionhttps://www.mjproducts.net/Vacuum-pump-seal-repair-kit-for-BMW-N63-S63-engineshttps://www.mjproducts.net/de/Reparatursatz-Vakuumpumpe-fuer-BMW-N63-S63-Motoren
FPM O-Ring 2.9 x 1.78 mm (FPM 75)
From
$1.30*
Properties of Viton (FPM/FKM): Fluoroelastomers have become increasingly important in the sealing industry. Due to their wide scope of application regarding chemical resistance, temperature range, low compression set and excellent aging properties, FPM/FKM is the most significant standalone elastomer developed in recent times. Fluoroelastomers are highly fluorinated carbon-based polymers that resist harsh chemical attacks and ozone in various applications. The operating temperature is between -20°C/-4°F and +204°C/+400°F, and temporarily higher.Fluoroelastomer o-rings should be considered for use in aircraft, automobiles and other mechanical equipment where maximum resistance to high temperatures and many fluids is required. FKM (FPM, Viton®) resists mineral oils and lubricants, aliphatic, aromatic and also special chlorinated hydrocarbons, gasoline, diesel fuels, silicone oils and lubricants. It can be used in high vacuum applications.- Excellent temperature resistance- High chemical stability- Very good ozone, weather, aging and oxygen resistance- Excellent resistance to mineral oils and fats- Low gas permeability- Very good resistance to non-polar media- Temperature resistance from -20°C/-4°F to +204°C/+400°FO-ring sizes: Inner diameter x cross sectionhttps://www.mjproducts.net/Vacuum-pump-seal-repair-kit-for-BMW-11667502656-11-66-7-502-656https://www.mjproducts.net/de/Reparatursatz-Vakuumpumpe-fuer-BMW-11667502656-11-66-7-502-656
FPM O-Ring 3.17 x 1.78 mm (FPM 75)
From
$1.31*
Properties of Viton (FPM/FKM): Fluoroelastomers have become increasingly important in the sealing industry. Due to their wide scope of application regarding chemical resistance, temperature range, low compression set and excellent aging properties, FPM/FKM is the most significant standalone elastomer developed in recent times. Fluoroelastomers are highly fluorinated carbon-based polymers that resist harsh chemical attacks and ozone in various applications. The operating temperature is between -20°C/-4°F and +204°C/+400°F, and temporarily higher.Fluoroelastomer o-rings should be considered for use in aircraft, automobiles and other mechanical equipment where maximum resistance to high temperatures and many fluids is required. FKM (FPM, Viton®) resists mineral oils and lubricants, aliphatic, aromatic and also special chlorinated hydrocarbons, gasoline, diesel fuels, silicone oils and lubricants. It can be used in high vacuum applications.- Excellent temperature resistance- High chemical stability- Very good ozone, weather, aging and oxygen resistance- Excellent resistance to mineral oils and fats- Low gas permeability- Very good resistance to non-polar media- Temperature resistance from -20°C/-4°F to +204°C/+400°FO-ring sizes: Inner diameter x cross sectionhttps://www.mjproducts.net/Vacuum-pump-seal-repair-kit-for-BMW-11667534236-11-66-7-534-236https://www.mjproducts.net/de/Reparatursatz-Vakuumpumpe-fuer-BMW-11667534236-11-66-7-534-236
FPM O-Ring 3.68 x 1.78 mm (FPM 75)
From
$1.31*
Properties of Viton (FPM/FKM): Fluoroelastomers have become increasingly important in the sealing industry. Due to their wide scope of application regarding chemical resistance, temperature range, low compression set and excellent aging properties, FPM/FKM is the most significant standalone elastomer developed in recent times. Fluoroelastomers are highly fluorinated carbon-based polymers that resist harsh chemical attacks and ozone in various applications. The operating temperature is between -20°C/-4°F and +204°C/+400°F, and temporarily higher.Fluoroelastomer o-rings should be considered for use in aircraft, automobiles and other mechanical equipment where maximum resistance to high temperatures and many fluids is required. FKM (FPM, Viton®) resists mineral oils and lubricants, aliphatic, aromatic and also special chlorinated hydrocarbons, gasoline, diesel fuels, silicone oils and lubricants. It can be used in high vacuum applications.- Excellent temperature resistance- High chemical stability- Very good ozone, weather, aging and oxygen resistance- Excellent resistance to mineral oils and fats- Low gas permeability- Very good resistance to non-polar media- Temperature resistance from -20°C/-4°F to +204°C/+400°FO-ring sizes: Inner diameter x cross sectionhttps://www.mjproducts.net/Vacuum-pump-seal-repair-kit-for-BMW-11667542498-11-66-7-542-498https://www.mjproducts.net/de/Reparatursatz-Vakuumpumpe-fuer-BMW-11667542498-11-66-7-542-498
FPM O-Ring 4.47 x 1.78 mm (FPM 75)
From
$1.32*
Properties of Viton (FPM/FKM): Fluoroelastomers have become increasingly important in the sealing industry. Due to their wide scope of application regarding chemical resistance, temperature range, low compression set and excellent aging properties, FPM/FKM is the most significant standalone elastomer developed in recent times. Fluoroelastomers are highly fluorinated carbon-based polymers that resist harsh chemical attacks and ozone in various applications. The operating temperature is between -20°C/-4°F and +204°C/+400°F, and temporarily higher.Fluoroelastomer o-rings should be considered for use in aircraft, automobiles and other mechanical equipment where maximum resistance to high temperatures and many fluids is required. FKM (FPM, Viton®) resists mineral oils and lubricants, aliphatic, aromatic and also special chlorinated hydrocarbons, gasoline, diesel fuels, silicone oils and lubricants. It can be used in high vacuum applications.- Excellent temperature resistance- High chemical stability- Very good ozone, weather, aging and oxygen resistance- Excellent resistance to mineral oils and fats- Low gas permeability- Very good resistance to non-polar media- Temperature resistance from -20°C/-4°F to +204°C/+400°FO-ring sizes: Inner diameter x cross sectionhttps://www.mjproducts.net/Vacuum-pump-seal-repair-kit-for-BMW-11667635656-11-66-7-635-656https://www.mjproducts.net/de/Reparatursatz-Vakuumpumpe-fuer-BMW-11667635656-11-66-7-635-656
FPM O-Ring 4.76 x 1.78 mm (FPM 75)
From
$1.32*
Properties of Viton (FPM/FKM): Fluoroelastomers have become increasingly important in the sealing industry. Due to their wide scope of application regarding chemical resistance, temperature range, low compression set and excellent aging properties, FPM/FKM is the most significant standalone elastomer developed in recent times. Fluoroelastomers are highly fluorinated carbon-based polymers that resist harsh chemical attacks and ozone in various applications. The operating temperature is between -20°C/-4°F and +204°C/+400°F, and temporarily higher.Fluoroelastomer o-rings should be considered for use in aircraft, automobiles and other mechanical equipment where maximum resistance to high temperatures and many fluids is required. FKM (FPM, Viton®) resists mineral oils and lubricants, aliphatic, aromatic and also special chlorinated hydrocarbons, gasoline, diesel fuels, silicone oils and lubricants. It can be used in high vacuum applications.- Excellent temperature resistance- High chemical stability- Very good ozone, weather, aging and oxygen resistance- Excellent resistance to mineral oils and fats- Low gas permeability- Very good resistance to non-polar media- Temperature resistance from -20°C/-4°F to +204°C/+400°FO-ring sizes: Inner diameter x cross sectionhttps://www.mjproducts.net/Vacuum-pump-seal-repair-kit-for-BMW-11660151054-11-66-0-151-054https://www.mjproducts.net/de/Reparatursatz-Vakuumpumpe-fuer-BMW-11660151054-11-66-0-151-054
FPM O-Ring 5.28 x 1.78 mm (FPM 75)
From
$1.31*
Properties of Viton (FPM/FKM): Fluoroelastomers have become increasingly important in the sealing industry. Due to their wide scope of application regarding chemical resistance, temperature range, low compression set and excellent aging properties, FPM/FKM is the most significant standalone elastomer developed in recent times. Fluoroelastomers are highly fluorinated carbon-based polymers that resist harsh chemical attacks and ozone in various applications. The operating temperature is between -20°C/-4°F and +204°C/+400°F, and temporarily higher.Fluoroelastomer o-rings should be considered for use in aircraft, automobiles and other mechanical equipment where maximum resistance to high temperatures and many fluids is required. FKM (FPM, Viton®) resists mineral oils and lubricants, aliphatic, aromatic and also special chlorinated hydrocarbons, gasoline, diesel fuels, silicone oils and lubricants. It can be used in high vacuum applications.- Excellent temperature resistance- High chemical stability- Very good ozone, weather, aging and oxygen resistance- Excellent resistance to mineral oils and fats- Low gas permeability- Very good resistance to non-polar media- Temperature resistance from -20°C/-4°F to +204°C/+400°FO-ring sizes: Inner diameter x cross sectionhttps://www.mjproducts.net/Vacuum-pump-seal-repair-kit-for-BMW-11660396829-11-66-0-396-829https://www.mjproducts.net/de/Reparatursatz-Vakuumpumpe-fuer-BMW-11660151054-11-66-0-151-054
FPM O-Ring 6.07 x 1.78 mm (FPM 75)
From
$1.32*
Properties of Viton (FPM/FKM): Fluoroelastomers have become increasingly important in the sealing industry. Due to their wide scope of application regarding chemical resistance, temperature range, low compression set and excellent aging properties, FPM/FKM is the most significant standalone elastomer developed in recent times. Fluoroelastomers are highly fluorinated carbon-based polymers that resist harsh chemical attacks and ozone in various applications. The operating temperature is between -20°C/-4°F and +204°C/+400°F, and temporarily higher.Fluoroelastomer o-rings should be considered for use in aircraft, automobiles and other mechanical equipment where maximum resistance to high temperatures and many fluids is required. FKM (FPM, Viton®) resists mineral oils and lubricants, aliphatic, aromatic and also special chlorinated hydrocarbons, gasoline, diesel fuels, silicone oils and lubricants. It can be used in high vacuum applications.- Excellent temperature resistance- High chemical stability- Very good ozone, weather, aging and oxygen resistance- Excellent resistance to mineral oils and fats- Low gas permeability- Very good resistance to non-polar media- Temperature resistance from -20°C/-4°F to +204°C/+400°FO-ring sizes: Inner diameter x cross sectionhttps://www.mjproducts.net/Vacuum-pump-seal-repair-kit-for-BMW-11667545384-11-66-7-545-384https://www.mjproducts.net/de/Reparatursatz-Vakuumpumpe-fuer-BMW-11667545384-11-66-7-545-384
FPM O-Ring 6.35 x 1.78 mm (FPM 75)
From
$1.32*
Properties of Viton (FPM/FKM): Fluoroelastomers have become increasingly important in the sealing industry. Due to their wide scope of application regarding chemical resistance, temperature range, low compression set and excellent aging properties, FPM/FKM is the most significant standalone elastomer developed in recent times. Fluoroelastomers are highly fluorinated carbon-based polymers that resist harsh chemical attacks and ozone in various applications. The operating temperature is between -20°C/-4°F and +204°C/+400°F, and temporarily higher.Fluoroelastomer o-rings should be considered for use in aircraft, automobiles and other mechanical equipment where maximum resistance to high temperatures and many fluids is required. FKM (FPM, Viton®) resists mineral oils and lubricants, aliphatic, aromatic and also special chlorinated hydrocarbons, gasoline, diesel fuels, silicone oils and lubricants. It can be used in high vacuum applications.- Excellent temperature resistance- High chemical stability- Very good ozone, weather, aging and oxygen resistance- Excellent resistance to mineral oils and fats- Low gas permeability- Very good resistance to non-polar media- Temperature resistance from -20°C/-4°F to +204°C/+400°FO-ring sizes: Inner diameter x cross sectionhttps://www.mjproducts.net/Vacuum-pump-seal-repair-kit-for-BMW-11667635657-11-66-7-635-657https://www.mjproducts.net/de/Reparatursatz-Vakuumpumpe-fuer-BMW-11667635657-11-66-7-635-657
FPM O-Ring 6.75 x 1.78 mm (FPM 75)
From
$1.33*
Properties of Viton (FPM/FKM): Fluoroelastomers have become increasingly important in the sealing industry. Due to their wide scope of application regarding chemical resistance, temperature range, low compression set and excellent aging properties, FPM/FKM is the most significant standalone elastomer developed in recent times. Fluoroelastomers are highly fluorinated carbon-based polymers that resist harsh chemical attacks and ozone in various applications. The operating temperature is between -20°C/-4°F and +204°C/+400°F, and temporarily higher.Fluoroelastomer o-rings should be considered for use in aircraft, automobiles and other mechanical equipment where maximum resistance to high temperatures and many fluids is required. FKM (FPM, Viton®) resists mineral oils and lubricants, aliphatic, aromatic and also special chlorinated hydrocarbons, gasoline, diesel fuels, silicone oils and lubricants. It can be used in high vacuum applications.- Excellent temperature resistance- High chemical stability- Very good ozone, weather, aging and oxygen resistance- Excellent resistance to mineral oils and fats- Low gas permeability- Very good resistance to non-polar media- Temperature resistance from -20°C/-4°F to +204°C/+400°FO-ring sizes: Inner diameter x cross sectionhttps://www.mjproducts.net/Vacuum-pump-seal-repair-kit-for-BMW-11662244266-11-66-2-244-266https://www.mjproducts.net/de/Reparatursatz-Vakuumpumpe-fuer-BMW-11662244266-11-66-2-244-266
FPM O-Ring 7.65 x 1.78 mm (FPM 75)
From
$1.34*
Properties of Viton (FPM/FKM): Fluoroelastomers have become increasingly important in the sealing industry. Due to their wide scope of application regarding chemical resistance, temperature range, low compression set and excellent aging properties, FPM/FKM is the most significant standalone elastomer developed in recent times. Fluoroelastomers are highly fluorinated carbon-based polymers that resist harsh chemical attacks and ozone in various applications. The operating temperature is between -20°C/-4°F and +204°C/+400°F, and temporarily higher.Fluoroelastomer o-rings should be considered for use in aircraft, automobiles and other mechanical equipment where maximum resistance to high temperatures and many fluids is required. FKM (FPM, Viton®) resists mineral oils and lubricants, aliphatic, aromatic and also special chlorinated hydrocarbons, gasoline, diesel fuels, silicone oils and lubricants. It can be used in high vacuum applications.- Excellent temperature resistance- High chemical stability- Very good ozone, weather, aging and oxygen resistance- Excellent resistance to mineral oils and fats- Low gas permeability- Very good resistance to non-polar media- Temperature resistance from -20°C/-4°F to +204°C/+400°FO-ring sizes: Inner diameter x cross sectionhttps://www.mjproducts.net/Vacuum-pump-seal-repair-kit-for-BMW-11662246126-11-66-2-246-126https://www.mjproducts.net/de/Reparatursatz-Vakuumpumpe-fuer-BMW-11662246126-11-66-2-246-126
FPM O-Ring 7.94 x 1.78 mm (FPM 75)
From
$1.35*
Properties of Viton (FPM/FKM): Fluoroelastomers have become increasingly important in the sealing industry. Due to their wide scope of application regarding chemical resistance, temperature range, low compression set and excellent aging properties, FPM/FKM is the most significant standalone elastomer developed in recent times. Fluoroelastomers are highly fluorinated carbon-based polymers that resist harsh chemical attacks and ozone in various applications. The operating temperature is between -20°C/-4°F and +204°C/+400°F, and temporarily higher.Fluoroelastomer o-rings should be considered for use in aircraft, automobiles and other mechanical equipment where maximum resistance to high temperatures and many fluids is required. FKM (FPM, Viton®) resists mineral oils and lubricants, aliphatic, aromatic and also special chlorinated hydrocarbons, gasoline, diesel fuels, silicone oils and lubricants. It can be used in high vacuum applications.- Excellent temperature resistance- High chemical stability- Very good ozone, weather, aging and oxygen resistance- Excellent resistance to mineral oils and fats- Low gas permeability- Very good resistance to non-polar media- Temperature resistance from -20°C/-4°F to +204°C/+400°FO-ring sizes: Inner diameter x cross sectionhttps://www.mjproducts.net/Vacuum-pump-seal-repair-kit-for-BMW-11662247490-11-66-2-247-490https://www.mjproducts.net/de/Reparatursatz-Vakuumpumpe-fuer-BMW-11662247490-11-66-2-247-490
FPM O-Ring 8.73 x 1.78 mm (FPM 75)
From
$1.34*
Properties of Viton (FPM/FKM): Fluoroelastomers have become increasingly important in the sealing industry. Due to their wide scope of application regarding chemical resistance, temperature range, low compression set and excellent aging properties, FPM/FKM is the most significant standalone elastomer developed in recent times. Fluoroelastomers are highly fluorinated carbon-based polymers that resist harsh chemical attacks and ozone in various applications. The operating temperature is between -20°C/-4°F and +204°C/+400°F, and temporarily higher.Fluoroelastomer o-rings should be considered for use in aircraft, automobiles and other mechanical equipment where maximum resistance to high temperatures and many fluids is required. FKM (FPM, Viton®) resists mineral oils and lubricants, aliphatic, aromatic and also special chlorinated hydrocarbons, gasoline, diesel fuels, silicone oils and lubricants. It can be used in high vacuum applications.- Excellent temperature resistance- High chemical stability- Very good ozone, weather, aging and oxygen resistance- Excellent resistance to mineral oils and fats- Low gas permeability- Very good resistance to non-polar media- Temperature resistance from -20°C/-4°F to +204°C/+400°FO-ring sizes: Inner diameter x cross sectionhttps://www.mjproducts.net/Vacuum-pump-seal-repair-kit-for-BMW-11662249939-11-66-2-249-939https://www.mjproducts.net/de/Reparatursatz-Vakuumpumpe-fuer-BMW-11662249939-11-66-2-249-939
FPM O-Ring 9.25 x 1.78 mm (FPM 75)
From
$1.34*
Properties of Viton (FPM/FKM): Fluoroelastomers have become increasingly important in the sealing industry. Due to their wide scope of application regarding chemical resistance, temperature range, low compression set and excellent aging properties, FPM/FKM is the most significant standalone elastomer developed in recent times. Fluoroelastomers are highly fluorinated carbon-based polymers that resist harsh chemical attacks and ozone in various applications. The operating temperature is between -20°C/-4°F and +204°C/+400°F, and temporarily higher.Fluoroelastomer o-rings should be considered for use in aircraft, automobiles and other mechanical equipment where maximum resistance to high temperatures and many fluids is required. FKM (FPM, Viton®) resists mineral oils and lubricants, aliphatic, aromatic and also special chlorinated hydrocarbons, gasoline, diesel fuels, silicone oils and lubricants. It can be used in high vacuum applications.- Excellent temperature resistance- High chemical stability- Very good ozone, weather, aging and oxygen resistance- Excellent resistance to mineral oils and fats- Low gas permeability- Very good resistance to non-polar media- Temperature resistance from -20°C/-4°F to +204°C/+400°FO-ring sizes: Inner diameter x cross sectionhttps://www.mjproducts.net/Vacuum-pump-seal-repair-kit-for-BMW-11667786841-11-66-7-786-841https://www.mjproducts.net/de/Reparatursatz-Vakuumpumpe-fuer-BMW-11667786841-11-66-7-786-841
FPM O-Ring 10.82 x 1.78 mm (FPM 75)
From
$1.35*
Properties of Viton (FPM/FKM): Fluoroelastomers have become increasingly important in the sealing industry. Due to their wide scope of application regarding chemical resistance, temperature range, low compression set and excellent aging properties, FPM/FKM is the most significant standalone elastomer developed in recent times. Fluoroelastomers are highly fluorinated carbon-based polymers that resist harsh chemical attacks and ozone in various applications. The operating temperature is between -20°C/-4°F and +204°C/+400°F, and temporarily higher.Fluoroelastomer o-rings should be considered for use in aircraft, automobiles and other mechanical equipment where maximum resistance to high temperatures and many fluids is required. FKM (FPM, Viton®) resists mineral oils and lubricants, aliphatic, aromatic and also special chlorinated hydrocarbons, gasoline, diesel fuels, silicone oils and lubricants. It can be used in high vacuum applications.- Excellent temperature resistance- High chemical stability- Very good ozone, weather, aging and oxygen resistance- Excellent resistance to mineral oils and fats- Low gas permeability- Very good resistance to non-polar media- Temperature resistance from -20°C/-4°F to +204°C/+400°FO-ring sizes: Inner diameter x cross sectionhttps://www.mjproducts.net/Vacuum-pump-seal-repair-kit-for-BMW-11667787366-11-66-7-787-366https://www.mjproducts.net/de/Reparatursatz-Vakuumpumpe-fuer-BMW-11667787366-11-66-7-787-366
FPM O-Ring 11.11 x 1.78 mm (FPM 75)
From
$1.36*
Properties of Viton (FPM/FKM): Fluoroelastomers have become increasingly important in the sealing industry. Due to their wide scope of application regarding chemical resistance, temperature range, low compression set and excellent aging properties, FPM/FKM is the most significant standalone elastomer developed in recent times. Fluoroelastomers are highly fluorinated carbon-based polymers that resist harsh chemical attacks and ozone in various applications. The operating temperature is between -20°C/-4°F and +204°C/+400°F, and temporarily higher.Fluoroelastomer o-rings should be considered for use in aircraft, automobiles and other mechanical equipment where maximum resistance to high temperatures and many fluids is required. FKM (FPM, Viton®) resists mineral oils and lubricants, aliphatic, aromatic and also special chlorinated hydrocarbons, gasoline, diesel fuels, silicone oils and lubricants. It can be used in high vacuum applications.- Excellent temperature resistance- High chemical stability- Very good ozone, weather, aging and oxygen resistance- Excellent resistance to mineral oils and fats- Low gas permeability- Very good resistance to non-polar media- Temperature resistance from -20°C/-4°F to +204°C/+400°FO-ring sizes: Inner diameter x cross sectionhttps://www.mjproducts.net/Vacuum-pump-seal-repair-kit-for-BMW-11667791232-11-66-7-791-232https://www.mjproducts.net/de/Reparatursatz-Vakuumpumpe-fuer-BMW-11667791232-11-66-7-791-232
FPM O-Ring 12.42 x 1.78 mm (FPM 75)
From
$1.36*
Properties of Viton (FPM/FKM): Fluoroelastomers have become increasingly important in the sealing industry. Due to their wide scope of application regarding chemical resistance, temperature range, low compression set and excellent aging properties, FPM/FKM is the most significant standalone elastomer developed in recent times. Fluoroelastomers are highly fluorinated carbon-based polymers that resist harsh chemical attacks and ozone in various applications. The operating temperature is between -20°C/-4°F and +204°C/+400°F, and temporarily higher.Fluoroelastomer o-rings should be considered for use in aircraft, automobiles and other mechanical equipment where maximum resistance to high temperatures and many fluids is required. FKM (FPM, Viton®) resists mineral oils and lubricants, aliphatic, aromatic and also special chlorinated hydrocarbons, gasoline, diesel fuels, silicone oils and lubricants. It can be used in high vacuum applications.- Excellent temperature resistance- High chemical stability- Very good ozone, weather, aging and oxygen resistance- Excellent resistance to mineral oils and fats- Low gas permeability- Very good resistance to non-polar media- Temperature resistance from -20°C/-4°F to +204°C/+400°FO-ring sizes: Inner diameter x cross sectionhttps://www.mjproducts.net/Vacuum-pump-seal-repair-kit-for-BMW-11667795142-11-66-7-795-142https://www.mjproducts.net/de/Reparatursatz-Vakuumpumpe-fuer-BMW-11667795142-11-66-7-795-142
FPM O-Ring 14 x 1.78 mm (FPM 75)
From
$1.38*
Properties of Viton (FPM/FKM): Fluoroelastomers have become increasingly important in the sealing industry. Due to their wide scope of application regarding chemical resistance, temperature range, low compression set and excellent aging properties, FPM/FKM is the most significant standalone elastomer developed in recent times. Fluoroelastomers are highly fluorinated carbon-based polymers that resist harsh chemical attacks and ozone in various applications. The operating temperature is between -20°C/-4°F and +204°C/+400°F, and temporarily higher.Fluoroelastomer o-rings should be considered for use in aircraft, automobiles and other mechanical equipment where maximum resistance to high temperatures and many fluids is required. FKM (FPM, Viton®) resists mineral oils and lubricants, aliphatic, aromatic and also special chlorinated hydrocarbons, gasoline, diesel fuels, silicone oils and lubricants. It can be used in high vacuum applications.- Excellent temperature resistance- High chemical stability- Very good ozone, weather, aging and oxygen resistance- Excellent resistance to mineral oils and fats- Low gas permeability- Very good resistance to non-polar media- Temperature resistance from -20°C/-4°F to +204°C/+400°FO-ring sizes: Inner diameter x cross sectionhttps://www.mjproducts.net/Vacuum-pump-seal-repair-kit-for-BMW-11667795143-11-66-7-795-143https://www.mjproducts.net/de/Reparatursatz-Vakuumpumpe-fuer-BMW-11667795143-11-66-7-795-143
FPM O-Ring 15.6 x 1.78 mm (FPM 75)
From
$1.38*
Properties of Viton (FPM/FKM): Fluoroelastomers have become increasingly important in the sealing industry. Due to their wide scope of application regarding chemical resistance, temperature range, low compression set and excellent aging properties, FPM/FKM is the most significant standalone elastomer developed in recent times. Fluoroelastomers are highly fluorinated carbon-based polymers that resist harsh chemical attacks and ozone in various applications. The operating temperature is between -20°C/-4°F and +204°C/+400°F, and temporarily higher.Fluoroelastomer o-rings should be considered for use in aircraft, automobiles and other mechanical equipment where maximum resistance to high temperatures and many fluids is required. FKM (FPM, Viton®) resists mineral oils and lubricants, aliphatic, aromatic and also special chlorinated hydrocarbons, gasoline, diesel fuels, silicone oils and lubricants. It can be used in high vacuum applications.- Excellent temperature resistance- High chemical stability- Very good ozone, weather, aging and oxygen resistance- Excellent resistance to mineral oils and fats- Low gas permeability- Very good resistance to non-polar media- Temperature resistance from -20°C/-4°F to +204°C/+400°FO-ring sizes: Inner diameter x cross sectionhttps://www.mjproducts.net/Vacuum-pump-seal-repair-kit-for-BMW-11667547024-11-66-7-547-024https://www.mjproducts.net/de/Reparatursatz-Vakuumpumpe-fuer-BMW-11667547024-11-66-7-547-024
FPM O-Ring 17.17 x 1.78 mm (FPM 75)
From
$1.39*
Properties of Viton (FPM/FKM): Fluoroelastomers have become increasingly important in the sealing industry. Due to their wide scope of application regarding chemical resistance, temperature range, low compression set and excellent aging properties, FPM/FKM is the most significant standalone elastomer developed in recent times. Fluoroelastomers are highly fluorinated carbon-based polymers that resist harsh chemical attacks and ozone in various applications. The operating temperature is between -20°C/-4°F and +204°C/+400°F, and temporarily higher.Fluoroelastomer o-rings should be considered for use in aircraft, automobiles and other mechanical equipment where maximum resistance to high temperatures and many fluids is required. FKM (FPM, Viton®) resists mineral oils and lubricants, aliphatic, aromatic and also special chlorinated hydrocarbons, gasoline, diesel fuels, silicone oils and lubricants. It can be used in high vacuum applications.- Excellent temperature resistance- High chemical stability- Very good ozone, weather, aging and oxygen resistance- Excellent resistance to mineral oils and fats- Low gas permeability- Very good resistance to non-polar media- Temperature resistance from -20°C/-4°F to +204°C/+400°FO-ring sizes: Inner diameter x cross sectionhttps://www.mjproducts.net/Vacuum-pump-seal-repair-kit-for-BMW-11667625260-11-66-7-625-260https://www.mjproducts.net/de/Reparatursatz-Vakuumpumpe-fuer-BMW-11667625260-11-66-7-625-260
FPM O-Ring 18.77 x 1.78 mm (FPM 75)
From
$1.39*
Properties of Viton (FPM/FKM): Fluoroelastomers have become increasingly important in the sealing industry. Due to their wide scope of application regarding chemical resistance, temperature range, low compression set and excellent aging properties, FPM/FKM is the most significant standalone elastomer developed in recent times. Fluoroelastomers are highly fluorinated carbon-based polymers that resist harsh chemical attacks and ozone in various applications. The operating temperature is between -20°C/-4°F and +204°C/+400°F, and temporarily higher.Fluoroelastomer o-rings should be considered for use in aircraft, automobiles and other mechanical equipment where maximum resistance to high temperatures and many fluids is required. FKM (FPM, Viton®) resists mineral oils and lubricants, aliphatic, aromatic and also special chlorinated hydrocarbons, gasoline, diesel fuels, silicone oils and lubricants. It can be used in high vacuum applications.- Excellent temperature resistance- High chemical stability- Very good ozone, weather, aging and oxygen resistance- Excellent resistance to mineral oils and fats- Low gas permeability- Very good resistance to non-polar media- Temperature resistance from -20°C/-4°F to +204°C/+400°FO-ring sizes: Inner diameter x cross sectionhttps://www.mjproducts.net/Vacuum-pump-seal-repair-kit-for-BMW-11667585189-11-66-7-585-189https://www.mjproducts.net/de/Reparatursatz-Vakuumpumpe-fuer-BMW-11667585189-11-66-7-585-189
FPM O-Ring 20.35 x 1.78 mm (FPM 75)
From
$1.40*
Properties of Viton (FPM/FKM): Fluoroelastomers have become increasingly important in the sealing industry. Due to their wide scope of application regarding chemical resistance, temperature range, low compression set and excellent aging properties, FPM/FKM is the most significant standalone elastomer developed in recent times. Fluoroelastomers are highly fluorinated carbon-based polymers that resist harsh chemical attacks and ozone in various applications. The operating temperature is between -20°C/-4°F and +204°C/+400°F, and temporarily higher.Fluoroelastomer o-rings should be considered for use in aircraft, automobiles and other mechanical equipment where maximum resistance to high temperatures and many fluids is required. FKM (FPM, Viton®) resists mineral oils and lubricants, aliphatic, aromatic and also special chlorinated hydrocarbons, gasoline, diesel fuels, silicone oils and lubricants. It can be used in high vacuum applications.- Excellent temperature resistance- High chemical stability- Very good ozone, weather, aging and oxygen resistance- Excellent resistance to mineral oils and fats- Low gas permeability- Very good resistance to non-polar media- Temperature resistance from -20°C/-4°F to +204°C/+400°FO-ring sizes: Inner diameter x cross sectionhttps://www.mjproducts.net/Vacuum-pump-seal-repair-kit-for-BMW-11667622380-11-66-7-622-380https://www.mjproducts.net/de/Reparatursatz-Vakuumpumpe-fuer-BMW-11667622380-11-66-7-622-380
FPM O-Ring 21.95 x 1.78 mm (FPM 75)
From
$1.41*
Properties of Viton (FPM/FKM): Fluoroelastomers have become increasingly important in the sealing industry. Due to their wide scope of application regarding chemical resistance, temperature range, low compression set and excellent aging properties, FPM/FKM is the most significant standalone elastomer developed in recent times. Fluoroelastomers are highly fluorinated carbon-based polymers that resist harsh chemical attacks and ozone in various applications. The operating temperature is between -20°C/-4°F and +204°C/+400°F, and temporarily higher.Fluoroelastomer o-rings should be considered for use in aircraft, automobiles and other mechanical equipment where maximum resistance to high temperatures and many fluids is required. FKM (FPM, Viton®) resists mineral oils and lubricants, aliphatic, aromatic and also special chlorinated hydrocarbons, gasoline, diesel fuels, silicone oils and lubricants. It can be used in high vacuum applications.- Excellent temperature resistance- High chemical stability- Very good ozone, weather, aging and oxygen resistance- Excellent resistance to mineral oils and fats- Low gas permeability- Very good resistance to non-polar media- Temperature resistance from -20°C/-4°F to +204°C/+400°FO-ring sizes: Inner diameter x cross sectionhttps://www.mjproducts.net/Vacuum-pump-seal-repair-kit-for-BMW-11667640279-11-66-7-640-279https://www.mjproducts.net/de/Reparatursatz-Vakuumpumpe-fuer-BMW-11667640279-11-66-7-640-279
FPM O-Ring 23.52 x 1.78 mm (FPM 75)
From
$1.41*
Properties of Viton (FPM/FKM): Fluoroelastomers have become increasingly important in the sealing industry. Due to their wide scope of application regarding chemical resistance, temperature range, low compression set and excellent aging properties, FPM/FKM is the most significant standalone elastomer developed in recent times. Fluoroelastomers are highly fluorinated carbon-based polymers that resist harsh chemical attacks and ozone in various applications. The operating temperature is between -20°C/-4°F and +204°C/+400°F, and temporarily higher.Fluoroelastomer o-rings should be considered for use in aircraft, automobiles and other mechanical equipment where maximum resistance to high temperatures and many fluids is required. FKM (FPM, Viton®) resists mineral oils and lubricants, aliphatic, aromatic and also special chlorinated hydrocarbons, gasoline, diesel fuels, silicone oils and lubricants. It can be used in high vacuum applications.- Excellent temperature resistance- High chemical stability- Very good ozone, weather, aging and oxygen resistance- Excellent resistance to mineral oils and fats- Low gas permeability- Very good resistance to non-polar media- Temperature resistance from -20°C/-4°F to +204°C/+400°FO-ring sizes: Inner diameter x cross sectionhttps://www.mjproducts.net/Vacuum-pump-seal-repair-kit-for-BMW-11667558344-11-66-7-558-344https://www.mjproducts.net/de/Reparatursatz-Vakuumpumpe-fuer-BMW-11667558344-11-66-7-558-344