FPM O-Ring 4 x 3 mm (FPM 75)
From
$1.47*
Properties of Viton (FPM/FKM): Fluoroelastomers have become increasingly important in the sealing industry. Due to their wide scope of application regarding chemical resistance, temperature range, low compression set and excellent aging properties, FPM/FKM is the most significant standalone elastomer developed in recent times. Fluoroelastomers are highly fluorinated carbon-based polymers that resist harsh chemical attacks and ozone in various applications. The operating temperature is between -20°C/-4°F and +204°C/+400°F, and temporarily higher.Fluoroelastomer o-rings should be considered for use in aircraft, automobiles and other mechanical equipment where maximum resistance to high temperatures and many fluids is required. FKM (FPM, Viton®) resists mineral oils and lubricants, aliphatic, aromatic and also special chlorinated hydrocarbons, gasoline, diesel fuels, silicone oils and lubricants. It can be used in high vacuum applications.- Excellent temperature resistance- High chemical stability- Very good ozone, weather, aging and oxygen resistance- Excellent resistance to mineral oils and fats- Low gas permeability- Very good resistance to non-polar media- Temperature resistance from -20°C/-4°F to +204°C/+400°FO-ring sizes: Inner diameter x cross section
FPM O-Ring 5 x 3 mm (FPM 75)
From
$1.47*
Properties of Viton (FPM/FKM): Fluoroelastomers have become increasingly important in the sealing industry. Due to their wide scope of application regarding chemical resistance, temperature range, low compression set and excellent aging properties, FPM/FKM is the most significant standalone elastomer developed in recent times. Fluoroelastomers are highly fluorinated carbon-based polymers that resist harsh chemical attacks and ozone in various applications. The operating temperature is between -20°C/-4°F and +204°C/+400°F, and temporarily higher.Fluoroelastomer o-rings should be considered for use in aircraft, automobiles and other mechanical equipment where maximum resistance to high temperatures and many fluids is required. FKM (FPM, Viton®) resists mineral oils and lubricants, aliphatic, aromatic and also special chlorinated hydrocarbons, gasoline, diesel fuels, silicone oils and lubricants. It can be used in high vacuum applications.- Excellent temperature resistance- High chemical stability- Very good ozone, weather, aging and oxygen resistance- Excellent resistance to mineral oils and fats- Low gas permeability- Very good resistance to non-polar media- Temperature resistance from -20°C/-4°F to +204°C/+400°FO-ring sizes: Inner diameter x cross section
FPM O-Ring 6 x 3 mm (FPM 75)
From
$1.46*
Properties of Viton (FPM/FKM): Fluoroelastomers have become increasingly important in the sealing industry. Due to their wide scope of application regarding chemical resistance, temperature range, low compression set and excellent aging properties, FPM/FKM is the most significant standalone elastomer developed in recent times. Fluoroelastomers are highly fluorinated carbon-based polymers that resist harsh chemical attacks and ozone in various applications. The operating temperature is between -20°C/-4°F and +204°C/+400°F, and temporarily higher.Fluoroelastomer o-rings should be considered for use in aircraft, automobiles and other mechanical equipment where maximum resistance to high temperatures and many fluids is required. FKM (FPM, Viton®) resists mineral oils and lubricants, aliphatic, aromatic and also special chlorinated hydrocarbons, gasoline, diesel fuels, silicone oils and lubricants. It can be used in high vacuum applications.- Excellent temperature resistance- High chemical stability- Very good ozone, weather, aging and oxygen resistance- Excellent resistance to mineral oils and fats- Low gas permeability- Very good resistance to non-polar media- Temperature resistance from -20°C/-4°F to +204°C/+400°FO-ring sizes: Inner diameter x cross section
FPM O-Ring 7 x 3 mm (FPM 75)
From
$1.48*
Properties of Viton (FPM/FKM): Fluoroelastomers have become increasingly important in the sealing industry. Due to their wide scope of application regarding chemical resistance, temperature range, low compression set and excellent aging properties, FPM/FKM is the most significant standalone elastomer developed in recent times. Fluoroelastomers are highly fluorinated carbon-based polymers that resist harsh chemical attacks and ozone in various applications. The operating temperature is between -20°C/-4°F and +204°C/+400°F, and temporarily higher.Fluoroelastomer o-rings should be considered for use in aircraft, automobiles and other mechanical equipment where maximum resistance to high temperatures and many fluids is required. FKM (FPM, Viton®) resists mineral oils and lubricants, aliphatic, aromatic and also special chlorinated hydrocarbons, gasoline, diesel fuels, silicone oils and lubricants. It can be used in high vacuum applications.- Excellent temperature resistance- High chemical stability- Very good ozone, weather, aging and oxygen resistance- Excellent resistance to mineral oils and fats- Low gas permeability- Very good resistance to non-polar media- Temperature resistance from -20°C/-4°F to +204°C/+400°FO-ring sizes: Inner diameter x cross section
FPM O-Ring 8 x 3 mm (FPM 75)
From
$1.49*
Properties of Viton (FPM/FKM): Fluoroelastomers have become increasingly important in the sealing industry. Due to their wide scope of application regarding chemical resistance, temperature range, low compression set and excellent aging properties, FPM/FKM is the most significant standalone elastomer developed in recent times. Fluoroelastomers are highly fluorinated carbon-based polymers that resist harsh chemical attacks and ozone in various applications. The operating temperature is between -20°C/-4°F and +204°C/+400°F, and temporarily higher.Fluoroelastomer o-rings should be considered for use in aircraft, automobiles and other mechanical equipment where maximum resistance to high temperatures and many fluids is required. FKM (FPM, Viton®) resists mineral oils and lubricants, aliphatic, aromatic and also special chlorinated hydrocarbons, gasoline, diesel fuels, silicone oils and lubricants. It can be used in high vacuum applications.- Excellent temperature resistance- High chemical stability- Very good ozone, weather, aging and oxygen resistance- Excellent resistance to mineral oils and fats- Low gas permeability- Very good resistance to non-polar media- Temperature resistance from -20°C/-4°F to +204°C/+400°FO-ring sizes: Inner diameter x cross section
FPM O-Ring 9 x 3 mm (FPM 75)
From
$1.50*
Properties of Viton (FPM/FKM): Fluoroelastomers have become increasingly important in the sealing industry. Due to their wide scope of application regarding chemical resistance, temperature range, low compression set and excellent aging properties, FPM/FKM is the most significant standalone elastomer developed in recent times. Fluoroelastomers are highly fluorinated carbon-based polymers that resist harsh chemical attacks and ozone in various applications. The operating temperature is between -20°C/-4°F and +204°C/+400°F, and temporarily higher.Fluoroelastomer o-rings should be considered for use in aircraft, automobiles and other mechanical equipment where maximum resistance to high temperatures and many fluids is required. FKM (FPM, Viton®) resists mineral oils and lubricants, aliphatic, aromatic and also special chlorinated hydrocarbons, gasoline, diesel fuels, silicone oils and lubricants. It can be used in high vacuum applications.- Excellent temperature resistance- High chemical stability- Very good ozone, weather, aging and oxygen resistance- Excellent resistance to mineral oils and fats- Low gas permeability- Very good resistance to non-polar media- Temperature resistance from -20°C/-4°F to +204°C/+400°FO-ring sizes: Inner diameter x cross section
FPM O-Ring 10 x 3 mm (FPM 75)
From
$1.51*
Properties of Viton (FPM/FKM): Fluoroelastomers have become increasingly important in the sealing industry. Due to their wide scope of application regarding chemical resistance, temperature range, low compression set and excellent aging properties, FPM/FKM is the most significant standalone elastomer developed in recent times. Fluoroelastomers are highly fluorinated carbon-based polymers that resist harsh chemical attacks and ozone in various applications. The operating temperature is between -20°C/-4°F and +204°C/+400°F, and temporarily higher.Fluoroelastomer o-rings should be considered for use in aircraft, automobiles and other mechanical equipment where maximum resistance to high temperatures and many fluids is required. FKM (FPM, Viton®) resists mineral oils and lubricants, aliphatic, aromatic and also special chlorinated hydrocarbons, gasoline, diesel fuels, silicone oils and lubricants. It can be used in high vacuum applications.- Excellent temperature resistance- High chemical stability- Very good ozone, weather, aging and oxygen resistance- Excellent resistance to mineral oils and fats- Low gas permeability- Very good resistance to non-polar media- Temperature resistance from -20°C/-4°F to +204°C/+400°FO-ring sizes: Inner diameter x cross section
FPM O-Ring 11 x 3 mm (FPM 75)
From
$1.52*
Properties of Viton (FPM/FKM): Fluoroelastomers have become increasingly important in the sealing industry. Due to their wide scope of application regarding chemical resistance, temperature range, low compression set and excellent aging properties, FPM/FKM is the most significant standalone elastomer developed in recent times. Fluoroelastomers are highly fluorinated carbon-based polymers that resist harsh chemical attacks and ozone in various applications. The operating temperature is between -20°C/-4°F and +204°C/+400°F, and temporarily higher.Fluoroelastomer o-rings should be considered for use in aircraft, automobiles and other mechanical equipment where maximum resistance to high temperatures and many fluids is required. FKM (FPM, Viton®) resists mineral oils and lubricants, aliphatic, aromatic and also special chlorinated hydrocarbons, gasoline, diesel fuels, silicone oils and lubricants. It can be used in high vacuum applications.- Excellent temperature resistance- High chemical stability- Very good ozone, weather, aging and oxygen resistance- Excellent resistance to mineral oils and fats- Low gas permeability- Very good resistance to non-polar media- Temperature resistance from -20°C/-4°F to +204°C/+400°FO-ring sizes: Inner diameter x cross section
FPM O-Ring 12 x 3 mm (FPM 75)
From
$1.52*
Properties of Viton (FPM/FKM): Fluoroelastomers have become increasingly important in the sealing industry. Due to their wide scope of application regarding chemical resistance, temperature range, low compression set and excellent aging properties, FPM/FKM is the most significant standalone elastomer developed in recent times. Fluoroelastomers are highly fluorinated carbon-based polymers that resist harsh chemical attacks and ozone in various applications. The operating temperature is between -20°C/-4°F and +204°C/+400°F, and temporarily higher.Fluoroelastomer o-rings should be considered for use in aircraft, automobiles and other mechanical equipment where maximum resistance to high temperatures and many fluids is required. FKM (FPM, Viton®) resists mineral oils and lubricants, aliphatic, aromatic and also special chlorinated hydrocarbons, gasoline, diesel fuels, silicone oils and lubricants. It can be used in high vacuum applications.- Excellent temperature resistance- High chemical stability- Very good ozone, weather, aging and oxygen resistance- Excellent resistance to mineral oils and fats- Low gas permeability- Very good resistance to non-polar media- Temperature resistance from -20°C/-4°F to +204°C/+400°FO-ring sizes: Inner diameter x cross section
FPM O-Ring 13 x 3 mm (FPM 75)
From
$1.52*
Properties of Viton (FPM/FKM): Fluoroelastomers have become increasingly important in the sealing industry. Due to their wide scope of application regarding chemical resistance, temperature range, low compression set and excellent aging properties, FPM/FKM is the most significant standalone elastomer developed in recent times. Fluoroelastomers are highly fluorinated carbon-based polymers that resist harsh chemical attacks and ozone in various applications. The operating temperature is between -20°C/-4°F and +204°C/+400°F, and temporarily higher.Fluoroelastomer o-rings should be considered for use in aircraft, automobiles and other mechanical equipment where maximum resistance to high temperatures and many fluids is required. FKM (FPM, Viton®) resists mineral oils and lubricants, aliphatic, aromatic and also special chlorinated hydrocarbons, gasoline, diesel fuels, silicone oils and lubricants. It can be used in high vacuum applications.- Excellent temperature resistance- High chemical stability- Very good ozone, weather, aging and oxygen resistance- Excellent resistance to mineral oils and fats- Low gas permeability- Very good resistance to non-polar media- Temperature resistance from -20°C/-4°F to +204°C/+400°FO-ring sizes: Inner diameter x cross section
FPM O-Ring 14 x 3 mm (FPM 75)
From
$1.53*
Properties of Viton (FPM/FKM): Fluoroelastomers have become increasingly important in the sealing industry. Due to their wide scope of application regarding chemical resistance, temperature range, low compression set and excellent aging properties, FPM/FKM is the most significant standalone elastomer developed in recent times. Fluoroelastomers are highly fluorinated carbon-based polymers that resist harsh chemical attacks and ozone in various applications. The operating temperature is between -20°C/-4°F and +204°C/+400°F, and temporarily higher.Fluoroelastomer o-rings should be considered for use in aircraft, automobiles and other mechanical equipment where maximum resistance to high temperatures and many fluids is required. FKM (FPM, Viton®) resists mineral oils and lubricants, aliphatic, aromatic and also special chlorinated hydrocarbons, gasoline, diesel fuels, silicone oils and lubricants. It can be used in high vacuum applications.- Excellent temperature resistance- High chemical stability- Very good ozone, weather, aging and oxygen resistance- Excellent resistance to mineral oils and fats- Low gas permeability- Very good resistance to non-polar media- Temperature resistance from -20°C/-4°F to +204°C/+400°FO-ring sizes: Inner diameter x cross section
FPM O-Ring 15 x 3 mm (FPM 75)
From
$1.53*
Properties of Viton (FPM/FKM): Fluoroelastomers have become increasingly important in the sealing industry. Due to their wide scope of application regarding chemical resistance, temperature range, low compression set and excellent aging properties, FPM/FKM is the most significant standalone elastomer developed in recent times. Fluoroelastomers are highly fluorinated carbon-based polymers that resist harsh chemical attacks and ozone in various applications. The operating temperature is between -20°C/-4°F and +204°C/+400°F, and temporarily higher.Fluoroelastomer o-rings should be considered for use in aircraft, automobiles and other mechanical equipment where maximum resistance to high temperatures and many fluids is required. FKM (FPM, Viton®) resists mineral oils and lubricants, aliphatic, aromatic and also special chlorinated hydrocarbons, gasoline, diesel fuels, silicone oils and lubricants. It can be used in high vacuum applications.- Excellent temperature resistance- High chemical stability- Very good ozone, weather, aging and oxygen resistance- Excellent resistance to mineral oils and fats- Low gas permeability- Very good resistance to non-polar media- Temperature resistance from -20°C/-4°F to +204°C/+400°FO-ring sizes: Inner diameter x cross section
FPM O-Ring 16 x 3 mm (FPM 75)
From
$1.53*
Properties of Viton (FPM/FKM): Fluoroelastomers have become increasingly important in the sealing industry. Due to their wide scope of application regarding chemical resistance, temperature range, low compression set and excellent aging properties, FPM/FKM is the most significant standalone elastomer developed in recent times. Fluoroelastomers are highly fluorinated carbon-based polymers that resist harsh chemical attacks and ozone in various applications. The operating temperature is between -20°C/-4°F and +204°C/+400°F, and temporarily higher.Fluoroelastomer o-rings should be considered for use in aircraft, automobiles and other mechanical equipment where maximum resistance to high temperatures and many fluids is required. FKM (FPM, Viton®) resists mineral oils and lubricants, aliphatic, aromatic and also special chlorinated hydrocarbons, gasoline, diesel fuels, silicone oils and lubricants. It can be used in high vacuum applications.- Excellent temperature resistance- High chemical stability- Very good ozone, weather, aging and oxygen resistance- Excellent resistance to mineral oils and fats- Low gas permeability- Very good resistance to non-polar media- Temperature resistance from -20°C/-4°F to +204°C/+400°FO-ring sizes: Inner diameter x cross section
FPM O-Ring 17 x 3 mm (FPM 75)
From
$1.54*
Properties of Viton (FPM/FKM): Fluoroelastomers have become increasingly important in the sealing industry. Due to their wide scope of application regarding chemical resistance, temperature range, low compression set and excellent aging properties, FPM/FKM is the most significant standalone elastomer developed in recent times. Fluoroelastomers are highly fluorinated carbon-based polymers that resist harsh chemical attacks and ozone in various applications. The operating temperature is between -20°C/-4°F and +204°C/+400°F, and temporarily higher.Fluoroelastomer o-rings should be considered for use in aircraft, automobiles and other mechanical equipment where maximum resistance to high temperatures and many fluids is required. FKM (FPM, Viton®) resists mineral oils and lubricants, aliphatic, aromatic and also special chlorinated hydrocarbons, gasoline, diesel fuels, silicone oils and lubricants. It can be used in high vacuum applications.- Excellent temperature resistance- High chemical stability- Very good ozone, weather, aging and oxygen resistance- Excellent resistance to mineral oils and fats- Low gas permeability- Very good resistance to non-polar media- Temperature resistance from -20°C/-4°F to +204°C/+400°FO-ring sizes: Inner diameter x cross section
FPM O-Ring 18 x 3 mm (FPM 75)
From
$1.54*
Properties of Viton (FPM/FKM): Fluoroelastomers have become increasingly important in the sealing industry. Due to their wide scope of application regarding chemical resistance, temperature range, low compression set and excellent aging properties, FPM/FKM is the most significant standalone elastomer developed in recent times. Fluoroelastomers are highly fluorinated carbon-based polymers that resist harsh chemical attacks and ozone in various applications. The operating temperature is between -20°C/-4°F and +204°C/+400°F, and temporarily higher.Fluoroelastomer o-rings should be considered for use in aircraft, automobiles and other mechanical equipment where maximum resistance to high temperatures and many fluids is required. FKM (FPM, Viton®) resists mineral oils and lubricants, aliphatic, aromatic and also special chlorinated hydrocarbons, gasoline, diesel fuels, silicone oils and lubricants. It can be used in high vacuum applications.- Excellent temperature resistance- High chemical stability- Very good ozone, weather, aging and oxygen resistance- Excellent resistance to mineral oils and fats- Low gas permeability- Very good resistance to non-polar media- Temperature resistance from -20°C/-4°F to +204°C/+400°FO-ring sizes: Inner diameter x cross section
FPM O-Ring 19 x 3 mm (FPM 75)
From
$1.55*
Properties of Viton (FPM/FKM): Fluoroelastomers have become increasingly important in the sealing industry. Due to their wide scope of application regarding chemical resistance, temperature range, low compression set and excellent aging properties, FPM/FKM is the most significant standalone elastomer developed in recent times. Fluoroelastomers are highly fluorinated carbon-based polymers that resist harsh chemical attacks and ozone in various applications. The operating temperature is between -20°C/-4°F and +204°C/+400°F, and temporarily higher.Fluoroelastomer o-rings should be considered for use in aircraft, automobiles and other mechanical equipment where maximum resistance to high temperatures and many fluids is required. FKM (FPM, Viton®) resists mineral oils and lubricants, aliphatic, aromatic and also special chlorinated hydrocarbons, gasoline, diesel fuels, silicone oils and lubricants. It can be used in high vacuum applications.- Excellent temperature resistance- High chemical stability- Very good ozone, weather, aging and oxygen resistance- Excellent resistance to mineral oils and fats- Low gas permeability- Very good resistance to non-polar media- Temperature resistance from -20°C/-4°F to +204°C/+400°FO-ring sizes: Inner diameter x cross section
FPM O-Ring 20 x 3 mm (FPM 75)
From
$1.55*
Properties of Viton (FPM/FKM): Fluoroelastomers have become increasingly important in the sealing industry. Due to their wide scope of application regarding chemical resistance, temperature range, low compression set and excellent aging properties, FPM/FKM is the most significant standalone elastomer developed in recent times. Fluoroelastomers are highly fluorinated carbon-based polymers that resist harsh chemical attacks and ozone in various applications. The operating temperature is between -20°C/-4°F and +204°C/+400°F, and temporarily higher.Fluoroelastomer o-rings should be considered for use in aircraft, automobiles and other mechanical equipment where maximum resistance to high temperatures and many fluids is required. FKM (FPM, Viton®) resists mineral oils and lubricants, aliphatic, aromatic and also special chlorinated hydrocarbons, gasoline, diesel fuels, silicone oils and lubricants. It can be used in high vacuum applications.- Excellent temperature resistance- High chemical stability- Very good ozone, weather, aging and oxygen resistance- Excellent resistance to mineral oils and fats- Low gas permeability- Very good resistance to non-polar media- Temperature resistance from -20°C/-4°F to +204°C/+400°FO-ring sizes: Inner diameter x cross section
FPM O-Ring 21 x 3 mm (FPM 75)
From
$1.57*
Properties of Viton (FPM/FKM): Fluoroelastomers have become increasingly important in the sealing industry. Due to their wide scope of application regarding chemical resistance, temperature range, low compression set and excellent aging properties, FPM/FKM is the most significant standalone elastomer developed in recent times. Fluoroelastomers are highly fluorinated carbon-based polymers that resist harsh chemical attacks and ozone in various applications. The operating temperature is between -20°C/-4°F and +204°C/+400°F, and temporarily higher.Fluoroelastomer o-rings should be considered for use in aircraft, automobiles and other mechanical equipment where maximum resistance to high temperatures and many fluids is required. FKM (FPM, Viton®) resists mineral oils and lubricants, aliphatic, aromatic and also special chlorinated hydrocarbons, gasoline, diesel fuels, silicone oils and lubricants. It can be used in high vacuum applications.- Excellent temperature resistance- High chemical stability- Very good ozone, weather, aging and oxygen resistance- Excellent resistance to mineral oils and fats- Low gas permeability- Very good resistance to non-polar media- Temperature resistance from -20°C/-4°F to +204°C/+400°FO-ring sizes: Inner diameter x cross section
FPM O-Ring 22 x 3 mm (FPM 75)
From
$1.57*
Properties of Viton (FPM/FKM): Fluoroelastomers have become increasingly important in the sealing industry. Due to their wide scope of application regarding chemical resistance, temperature range, low compression set and excellent aging properties, FPM/FKM is the most significant standalone elastomer developed in recent times. Fluoroelastomers are highly fluorinated carbon-based polymers that resist harsh chemical attacks and ozone in various applications. The operating temperature is between -20°C/-4°F and +204°C/+400°F, and temporarily higher.Fluoroelastomer o-rings should be considered for use in aircraft, automobiles and other mechanical equipment where maximum resistance to high temperatures and many fluids is required. FKM (FPM, Viton®) resists mineral oils and lubricants, aliphatic, aromatic and also special chlorinated hydrocarbons, gasoline, diesel fuels, silicone oils and lubricants. It can be used in high vacuum applications.- Excellent temperature resistance- High chemical stability- Very good ozone, weather, aging and oxygen resistance- Excellent resistance to mineral oils and fats- Low gas permeability- Very good resistance to non-polar media- Temperature resistance from -20°C/-4°F to +204°C/+400°FO-ring sizes: Inner diameter x cross section
FPM O-Ring 23 x 3 mm (FPM 75)
From
$1.58*
Properties of Viton (FPM/FKM): Fluoroelastomers have become increasingly important in the sealing industry. Due to their wide scope of application regarding chemical resistance, temperature range, low compression set and excellent aging properties, FPM/FKM is the most significant standalone elastomer developed in recent times. Fluoroelastomers are highly fluorinated carbon-based polymers that resist harsh chemical attacks and ozone in various applications. The operating temperature is between -20°C/-4°F and +204°C/+400°F, and temporarily higher.Fluoroelastomer o-rings should be considered for use in aircraft, automobiles and other mechanical equipment where maximum resistance to high temperatures and many fluids is required. FKM (FPM, Viton®) resists mineral oils and lubricants, aliphatic, aromatic and also special chlorinated hydrocarbons, gasoline, diesel fuels, silicone oils and lubricants. It can be used in high vacuum applications.- Excellent temperature resistance- High chemical stability- Very good ozone, weather, aging and oxygen resistance- Excellent resistance to mineral oils and fats- Low gas permeability- Very good resistance to non-polar media- Temperature resistance from -20°C/-4°F to +204°C/+400°FO-ring sizes: Inner diameter x cross section
FPM O-Ring 24 x 3 mm (FPM 75)
From
$1.59*
Properties of Viton (FPM/FKM): Fluoroelastomers have become increasingly important in the sealing industry. Due to their wide scope of application regarding chemical resistance, temperature range, low compression set and excellent aging properties, FPM/FKM is the most significant standalone elastomer developed in recent times. Fluoroelastomers are highly fluorinated carbon-based polymers that resist harsh chemical attacks and ozone in various applications. The operating temperature is between -20°C/-4°F and +204°C/+400°F, and temporarily higher.Fluoroelastomer o-rings should be considered for use in aircraft, automobiles and other mechanical equipment where maximum resistance to high temperatures and many fluids is required. FKM (FPM, Viton®) resists mineral oils and lubricants, aliphatic, aromatic and also special chlorinated hydrocarbons, gasoline, diesel fuels, silicone oils and lubricants. It can be used in high vacuum applications.- Excellent temperature resistance- High chemical stability- Very good ozone, weather, aging and oxygen resistance- Excellent resistance to mineral oils and fats- Low gas permeability- Very good resistance to non-polar media- Temperature resistance from -20°C/-4°F to +204°C/+400°FO-ring sizes: Inner diameter x cross section
FPM O-Ring 25 x 3 mm (FPM 75)
From
$1.60*
Properties of Viton (FPM/FKM): Fluoroelastomers have become increasingly important in the sealing industry. Due to their wide scope of application regarding chemical resistance, temperature range, low compression set and excellent aging properties, FPM/FKM is the most significant standalone elastomer developed in recent times. Fluoroelastomers are highly fluorinated carbon-based polymers that resist harsh chemical attacks and ozone in various applications. The operating temperature is between -20°C/-4°F and +204°C/+400°F, and temporarily higher.Fluoroelastomer o-rings should be considered for use in aircraft, automobiles and other mechanical equipment where maximum resistance to high temperatures and many fluids is required. FKM (FPM, Viton®) resists mineral oils and lubricants, aliphatic, aromatic and also special chlorinated hydrocarbons, gasoline, diesel fuels, silicone oils and lubricants. It can be used in high vacuum applications.- Excellent temperature resistance- High chemical stability- Very good ozone, weather, aging and oxygen resistance- Excellent resistance to mineral oils and fats- Low gas permeability- Very good resistance to non-polar media- Temperature resistance from -20°C/-4°F to +204°C/+400°FO-ring sizes: Inner diameter x cross section
FPM O-Ring 26 x 3 mm (FPM 75)
From
$1.61*
Properties of Viton (FPM/FKM): Fluoroelastomers have become increasingly important in the sealing industry. Due to their wide scope of application regarding chemical resistance, temperature range, low compression set and excellent aging properties, FPM/FKM is the most significant standalone elastomer developed in recent times. Fluoroelastomers are highly fluorinated carbon-based polymers that resist harsh chemical attacks and ozone in various applications. The operating temperature is between -20°C/-4°F and +204°C/+400°F, and temporarily higher.Fluoroelastomer o-rings should be considered for use in aircraft, automobiles and other mechanical equipment where maximum resistance to high temperatures and many fluids is required. FKM (FPM, Viton®) resists mineral oils and lubricants, aliphatic, aromatic and also special chlorinated hydrocarbons, gasoline, diesel fuels, silicone oils and lubricants. It can be used in high vacuum applications.- Excellent temperature resistance- High chemical stability- Very good ozone, weather, aging and oxygen resistance- Excellent resistance to mineral oils and fats- Low gas permeability- Very good resistance to non-polar media- Temperature resistance from -20°C/-4°F to +204°C/+400°FO-ring sizes: Inner diameter x cross section
FPM O-Ring 27 x 3 mm (FPM 75)
From
$1.62*
Properties of Viton (FPM/FKM): Fluoroelastomers have become increasingly important in the sealing industry. Due to their wide scope of application regarding chemical resistance, temperature range, low compression set and excellent aging properties, FPM/FKM is the most significant standalone elastomer developed in recent times. Fluoroelastomers are highly fluorinated carbon-based polymers that resist harsh chemical attacks and ozone in various applications. The operating temperature is between -20°C/-4°F and +204°C/+400°F, and temporarily higher.Fluoroelastomer o-rings should be considered for use in aircraft, automobiles and other mechanical equipment where maximum resistance to high temperatures and many fluids is required. FKM (FPM, Viton®) resists mineral oils and lubricants, aliphatic, aromatic and also special chlorinated hydrocarbons, gasoline, diesel fuels, silicone oils and lubricants. It can be used in high vacuum applications.- Excellent temperature resistance- High chemical stability- Very good ozone, weather, aging and oxygen resistance- Excellent resistance to mineral oils and fats- Low gas permeability- Very good resistance to non-polar media- Temperature resistance from -20°C/-4°F to +204°C/+400°FO-ring sizes: Inner diameter x cross section